Our Products

Every Panel Category
Under One Roof

From basic DOL starters to fully automated batching plant control systems — we design, fabricate, wire, and test the complete range of industrial control panels.

Global Technologies control panel manufacturing workshop
Our Workshop, Dombivli East

Every panel engineered, fabricated, wired and tested in-house — dispatched only after passing our load-bank test.

MCC
Motor Control Centre (MCC) Panels
Centralised control for multiple motor loads in one compact, well-organised enclosure. Built for pump houses, compressor rooms, HVAC plant rooms, and factory floors — from 50A to 3200A bus ratings.
IS 8623 IEC 60439 IP54 / IP65
What's Included
  • Outgoing feeders with MCB/MCCB/SFU as per load requirement
  • Incoming MCCB with under-voltage and shunt trip
  • DOL, Star-Delta or Soft Starter for each motor
  • Selector switches — Auto / Manual / Off
  • Run & Trip indication lamps per feeder
  • Ammeter with CT, Voltmeter with selector switch
  • Busbar in copper or aluminium per design current
  • Cable entry from bottom with removable gland plate
Technical Specifications
Rated CurrentUp to 3200A
Voltage415V ±10%, 3-phase, 4-wire
Frequency50 Hz ±5%
Short Circuit RatingUp to 50kA (with bus coupler)
Protection ClassIP54 standard, IP65/IP66 optional
EnclosureCRCA MS powder-coated / SS304
BusbarCopper / Aluminium, shrouded
ComponentsSchneider, ABB, Siemens, L&T
PLC
PLC Automation Panels
Programmable logic controller panels for sequence automation, process control, and interlocking. Siemens S7, Allen-Bradley, Mitsubishi, and Delta PLCs — configured to your exact process requirements.
SCADA Ready HMI Included Modbus/Profibus
Applications
  • Concrete batching & weighing automation
  • Conveyor sequencing and interlocking
  • Pump & compressor auto start-stop
  • Water treatment plant control
  • Packaging line automation
  • Boiler and process temperature control
  • VFD speed control via PLC analog output
  • Remote I/O with Modbus RTU/TCP
Technical Specifications
PLC BrandsSiemens, Allen-Bradley, Mitsubishi, Delta
HMI7" / 10" touch panel (client's choice)
CommunicationModbus RTU/TCP, Profibus, EtherNet/IP
I/O ModulesDI, DO, AI (4–20mA), AO, RTD
Power Supply24V DC SMPS (redundant optional)
ProtectionIP54, IP65, or IP66 as required
ProgrammingLadder, FBD, ST, SFC (IEC 61131)
DocumentationGA, SLD, I/O list, ladder program PDF
APFC
Automatic Power Factor Correction (APFC) Panels
Keep your power factor above 0.97 automatically and avoid MSEDCL/discom penalty charges. Capacitor banks switched in steps by a relay controller — silent, automatic, and maintenance-free.
Auto PF Relay Capacitor Duty Contactor Detuned Available
What's Included
  • Automatic PF relay (EPCOS / Ducati / Circutor)
  • Capacitor duty contactors with surge suppressor
  • Dry-type capacitors (self-healing, cylindrical)
  • HRC fuses for each capacitor bank
  • Voltmeter, ammeter, PF meter, kVAr meter
  • Detuned reactors (7% or 14%) optional
  • Harmonic filter option for VFD-heavy loads
  • Bus coupler for dual incomer variants
Technical Specifications
Voltage415V, 3-phase, 50Hz
kVAr Range10 kVAr to 500 kVAr (steps of 10–50 kVAr)
Target PFAdjustable 0.90 to 0.99 (typically 0.97+)
Stages4 to 12 steps per panel
CapacitorsICAR / Epcos, self-healing film type
PF RelayEPCOS BR6000 / Circutor MC5 or equivalent
EnclosureMS powder-coated, IP54 minimum
ROITypically 12–24 months on penalty savings
Starters
DOL, Star-Delta & Soft Starter Panels
Cost-effective motor starting solutions from simple direct-online starters to reduced-voltage star-delta panels for 15kW+ motors. Also VFD drive panels for variable-speed applications.
DOL up to 15kW Star-Delta 7.5–200kW VFD Panels
Starter Types We Build
  • DOL (Direct On-Line) — up to 15kW, single or 3-phase
  • Star-Delta — 7.5kW to 200kW, timer or current-relay operated
  • Auto-Transformer Starter — heavy-duty reduced voltage start
  • Soft Starter (Schneider Altistart, ABB PSR/PSTB)
  • VFD Drive Panels (Danfoss, Schneider, Delta, ABB)
  • Reversing Starters for elevator, crane, and conveyor duty
  • Pump Controller Panels with dry-run and over-pressure protection
  • Multi-pump Alternating Panels
Standard Features
ProtectionOverload relay, short circuit breaker
IndicationsRun (Green), Trip (Red), Power (Amber)
Control Supply230V AC from control transformer
Remote ProvisionRemote start/stop terminals as standard
AmmeterDIN rail type with CT
WiringFR, colour-coded PVC insulated cables
FerrulingAll wires numbered as per SLD
TestingNo-load run test before dispatch
Our Speciality

Concrete Batching Plant Automation

The most demanding environment in infrastructure: dusty, wet, continuous operation, 24×7 pressure to produce concrete on time. Our batching automation panels are engineered specifically for this challenge.

IP66 Dustproof Enclosures
Heavy-duty powder-coated MS or SS304 enclosures with EPDM seals, rated IP66 — no cement dust ingress, no moisture condensation issues.
Load Cell / Weighing Integration
4–20mA analog interfaces for load cell amplifiers (aggregate, sand, cement, water, admixture) with PLC-based recipe batching and tolerance correction.
SCADA / HMI with Recipe Storage
Dedicated batching HMI with recipe management (up to 100 recipes), batch count logging, cumulative production totaliser, and alarm history.
On-Site Commissioning
We send our panel engineer to your site for commissioning, load cell calibration, PLC program fine-tuning, and operator training — typically 1–2 days.
Request Batching Panel Quotation →
Batching Sequence — Live
1. Aggregate Weigh
820 / 820 kg ✓
2. Sand Weigh
410 / 410 kg ✓
3. Cement Weigh
287 / 300 kg…
4. Water Weigh
— / 175 L
5. Admixture
— / 2.4 L
6. Discharge & Mix
Pending
Batch Progress Batch #1,247
Industries Served

Where Our Panels Work

🏗️
Infrastructure
Ready-mix concrete plants, road construction equipment, tunnel boring systems.
🏭
Manufacturing
Automotive assembly lines, press shops, compressor rooms, general factory automation.
🍪
Food Processing
Parle, biscuit and snack production lines — SS enclosures, hygienic cable management.
🚛
Automotive
Swaraj Mazda, Force Motors — MCC panels for assembly and testing line utilities.
💧
Water Treatment
Pump control panels, VFD drive panels, SCADA-integrated process control for WTPs and STPs.
⚡
Power Distribution
APFC panels, distribution boards, LT panels for commercial buildings and industrial utilities.
🏨
Commercial
HVAC control panels, AHU control, chiller sequencing for hotels and large buildings.
🔬
Pharma & Chemical
Hazardous area (ATEX-compliant available), clean-room grade wiring, SS304 enclosures.
Need a Panel Not Listed Here?
Send us your requirement — we've built custom panels for dozens of unique applications.
Request a Quote Call +91 99871 47199